Відео

Lighting can be installed in the panel of the coffer modules and/or in the hollow cavity of the beams.

The system is custom manufactured to fit your ceiling so no cutting of the coffer modules is required.

Thanks!

I'm glad you can appreciate that about it.

@@cofferedceilings Keep up the good work man, salute!

It's actually super simple to install. We've never had a single customer get stuck or have trouble with the installation process.

Thank you very much!

Yatin Dalvi 😂

Luckily no calculus is required to purchase or install our system!

None of the coffer modules ("sections") will need to be cut to fit since they are custom manufactured to fit your ceiling based on the dimensions you provide to us. Yes, you can cut the ceiling panel to allow for lights and if a light fixture does not fall favorably within a coffer module you can relocate it accordingly.

I'm sorry, but we don't ship to the UK as it is cost prohibitive.

Tilton Coffered Ceilings . If only you did as it's not available here, so many would buy these

Loctite® PL® Premium® Polyurethane Construction Adhesive

Yes, that is correct!

Glad you liked it and thank you for the appreciation of our efforts to produce it!

Yes Captain, in remodel type applications light fixtures will typically exist and as such you would simply need to cut the appropriate size openings in the Ceiling Panel of the Coffer Modules to accommodate for those fixtures. With surface mounted light fixtures the junction boxes would need to have extensions added to them and with recessed fixtures they would need to be removed and "remodel" type fixtures reinstalled by way of securing them to the Ceiling Panel of the Coffer Modules with their integrated clips instead of to the drywall. An easier solution for applications where light fixtures already exist would be to utilize our No Ceiling Panel option found on the following page which allows for the fixtures to remain in place during the installation: www.tiltoncofferedceilings.com/box-beam-ceiling/product-options/ceiling-panels/

Yes, and you can enter the dimensions of your ceiling into our Design & Quote tool via the following link: www.tiltoncofferedceilings.com/coffered-ceiling-design-quote-software/

I'm not sure what makes you say that? We have yet to encounter a ceiling size or shape that it won't work on (many of which have been less than ideal). As the video demonstrates, the system actually overcomes many of the obstacles one would typically face when trying to install a coffered ceiling from scratch.

@@cofferedceilings Sorry, but I aint seein' it.

Yes, you will need to ensure that all of the lag screws used to secure the coffer modules are driven into the joists regardless of their actual spacing.

We'd be happy to help you obtain. Just visit our website at www.tiultoncofferedceilings.com or give us a call at (800) 396-6410

We have complete faith in him that he can!

Thank You!

Absolutely

It's easy enough to do yourself and well within the skillset of any carpenter or contractor. No prior experience needed.

Actually it's not at all. A little time consuming, but not difficult. Having a laser level is the key! Just drive the shim screws in/out to set for level. However, it's not a requirement to level the system should you choose to forego this step, but it's a great feature for when needed.

Measuring to find the center point of the ceiling is about as basic as it gets and once you locate the first joist and know their spacing (i.e. 16" or 24" on-center) finding and marking the rest is quick and easy.

Yes, strictly decorative!

Not a problem! We realize that lots of homes are framed with joists or trusses at spacing other than 16" on-center (i.e. 19.2" or 24") and since our coffer modules only require 4 mounting points each (with the average size being in the 48" range) they will all cross over at least 2 joists/trusses to provide the 4 mounting points as needed.

Use whatever color chalk you see fit and it's at the installers discretion which joinery methods they wish to use on the Beam Bottom Boards (which are the joints I believe you're referring to). However, countless ceilings have been completed with our system with out any negative feedback to this effect otherwise.

We realize that lots of homes are framed with joists or trusses at spacing other than 16" on-center (i.e. 19.2" or 24") and since our coffer modules only require 4 mounting points each (with the average size being in the 48" range) they will all cross over at least 2 joists/trusses to provide the 4 mounting points as needed.

People all over the country are utilizing our products to enhance their ceilings. www.tiltoncofferedceilings.com/ceiling-treatment-products/

about the same as someone commenting about it

It makes no difference with regards to the installation of our Ceiling System.

We realize that lots of homes are framed with joists or trusses at spacing other than 16" on-center (i.e. 19.2" or 24") and since our coffer modules only require 4 mounting points each (with the average size being in the 48" range) they will all cross over at least 2 joists/trusses to provide the 4 mounting points as needed.

Thank You!

We realize that no ceiling or room is going to be perfectly square and so our Box Beam Coffered Ceiling Systems have been designed to allow for flexibility in the Perimeter Beam Board to allow for variances. The Perimeter Beam Board can be ripped, scribed and/or tapered to accommodate as needed with the Perimeter molding covering any remaining differences.

Greatly appreciate the positive feedback!

is it hard to do I'm thinking of doing this

We make it easier than ever!

We realize that lots of homes are framed with joists or trusses at spacing other than 16" on-center (i.e. 19.2" or 24") and since our coffer modules only require 4 mounting points each (with the average size being in the 48" range) they will all cross over at least 2 joists/trusses to provide the 4 mounting points as needed.

Our Pleasure!

Stop asking Real Word Questions, Your ruining my perfect ceiling ;-)

You’d have to plan around the immovable thing (sprinklers) and plan to move all the rest around your ceiling. This is why most people do these ceilings at new construction or during a remodel. It seems as though you will have to supply this company with an actual measured layout of the room, and the pieces will be made specifically for your space. As for the squareness of the room, the level-ness of the ceiling etc - they were addressed in the video.

Simple. You delete the lights and sprinklers in that room.

We don't build our ceiling systems on a laptop, we custom manufacture them in facilities right here in the USA to support our economy. The video was created in virtual reality to provide a clear and concise overview of our simple process, but we also have a live action video for any naysayers that you can check out on our channel. 1. If you have can/recessed light fixtures you can opt for our 'No Ceiling Panel' option which will allow you to install our system around these fixtures without the need to relocate or disturb them OR you can cut the appropriate sized holes for these fixtures into any of our other Ceiling Panel Options. www.tiltoncofferedceilings.com/box-beam-ceiling/product-options/ceiling-panels/ 2. Unless you are willing to relocate the sprinkler heads we would need to plan the layout of your coffered ceiling so that they fall in desirable locations. 3. Same as the answer for #1 except that speakers can be easily relocated as needed. 4. We realize that no ceiling or room is going to be perfectly square and so our Box Beam Coffered Ceiling Systems have been designed to allow for flexibility in the Perimeter Beam Board to allow for variances. The Perimeter Beam Board can be ripped, scribed and/or tapered to accommodate as needed with the Perimeter molding covering any remaining differences.

@@ralphvalkenhoff2887 This is certainly another viable option

Nice !! Can we do it??? Ithink so???

Exactly! It's a quick & easy process that provides a consistent level of quality that just can't be matched in the field.

@@adrianaguilar499 Yes you can!

Thank you for the positive feedback as we put a lot of time and effort into it.

Thank You!